Facade Renovation and Masonry

Description

Job Task: Renovation of the facade and masonry work Total Area: ~85 m2 Type of Work: Facade repair (without insulation), filling voids, painting. 1. Preparation and Dismantling Door Dismantling: Dismantling of the second floor door block (~3.3 m2). Surface Cleaning: Cleaning the facade from peeling plaster, paint layers, moss, or dirt. Primer Layer: Treatment of all surfaces with a deep primer for improved adhesion. 2. Masonry and Leveling Work Masonry of the second floor opening: Filling the door opening (~3.3 m2). Note: Use aerated concrete blocks (thickness corresponding to the existing wall, e.g., 300mm or thicker) to ensure energy efficiency and avoid frost damage. First floor niche filling: Leveling of former window openings (depth ~17 cm) to the facade plane. Solution: Masonry with lightweight concrete blocks or gluing sturdy insulation materials (such as extruded polystyrene or stone wool) if the structure allows, to achieve a uniform level. Reinforcement: All new masonry joints with the existing wall must be reinforced with mesh to prevent cracks. 3. Plastering and Decorative Finish Facade Leveling: Filling uneven areas and plastering the entire facade (85 m2) with reinforcing mortar and mesh (throughout the area). Painting: Painting the facade in two coats, matching the tone to the existing facade color. 4. Rainwater Drainage Extension/construction of existing rainwater drain pipes down to the first floor (to the ground or specified outlet point).